Screen Side Wear Plates | Screen Protection

Attaching Side Wear Plates for Screen Protection

With so many variables in the design, age and performance of vibrating machines, Polydeck offers a wide variety of ways to attach side wear plates to the walls of your machines. The best option for your operation should be agreed upon up front, based on factors such as budget, width of the machine, bed depth and machine settings.

Wear Plate - Bolt-on
For bolting directly to the side wall of the machine
Wear Plate Slotted
Allows vertical adjustment to ensure secure fit
Wedge Clip

Wear Plates - Universal Wedge Clip
New design works on both sides of machine
Angle Clip
Wear Plate - Angle Clip
Left and right hand versions required

Accessories: Side Wear Plates

Screen Side Wear Plates

Polydeck's side wear plates protect the sides of your vibrating screen from excessive wear, while also holding screen panels on the outside edge of the deck securely in position.

Available Materials

  • SB (Steel-backed) Rubber - 1-1/8" think in standard 6" and 12" heights; typically used in dry/coarse applications.
  • Steel-reinforced Polyurethane - 3/4" thick by 5" high or 1-1/4" thick by 8" high; typically used in wet/fine applications.
  • UHMW (Ultra High Molecular Weight) - from 1" to 2-1/2" thick and 5" to 12" high; easy to work with option costs less to install but offers shorter service life.

Side Wear Plates data sheetAttachment Options

  • Bolt-on
  • Angle clip
  • Universal wedge clip and wedge

For more information, download the Polydeck Side Wear Plates data sheet. »